Nausicaa - Project Update - Images from A&L Auto Body (4th Set)

 Small update from A&L Auto Body.

The hole in the side has been repaired.

Nausicaa - Project Update - Images from A&L Auto Body (3rd Set)

Got another update from A&L Auto Body.

They have been working on removing the rust from the old repair.

Nausicaa - Project Update - Images from A&L Auto Body (2nd Set)

 Today I got an update from A&L Auto Body. Between the initial assessment and now they had other priority projects to work on.

This was from just after it was initially moved after the initial assessment and ready for them to begin further work.

Nausicaa - Project Update - Images from P&L Motorsports (11th Set)

Another update from P&L Motorsports. While the car body is at A&L Auto Body undergoing body and paint work the engine has been worked on.

At this point a lot of parts have been removed and the oil pump is being replaced.

Nausicaa - Project Update - Parts Ordered

It has been a while since I provided an update on parts ordered. So I figured I would provide an list of somewhat recently ordered parts. I think we are getting close to being done with this phase, at least I hope we are.

K Series Parts:

K-Tuned Oil Pressure Sensor Adapter
Part no.: KTD-OPS-ADA
Price:    $29.69

SPC 92-01 Prelude Front Or Rear Adjustable Upper Ball Joint 1 Side
Part no.: 67165
Price:    $78.55
Total Price: $157.10

Nausicaa - Project Update - Images from A&L Auto Body (1st Set)

The car has been dropped off with A&L Auto Body (they do not have a website as far as I can tell). We were looking for an auto body shop to paint the interior, engine bay, roll cage, repair any rust, and then primer the exterior.

A&L Auto Body was recommended to us by Olsen Motorsports as they have had many customers satisfactorily work with them in the past. P&L Motorsports did not have a body shop they recommended at this time.

Nausicaa - Project Update - Images from P&L Motorsports (10th Set)

 Another update from P&L Motorsports. They were working on the suspension fitment and performing an alignment and wanted to lower the car a bit more. What they found is that our JRZ RS Pro coilovers did not have enough space with the bump stop to be lower the car as far as needed.

We got in contact with Tim Olsen at Olsen Motorsports.

Nausicaa - Project Update - Images from P&L Motorsports (9th Set)

 Another set of images and video from P&L Motorsports. We have two videos of engine testing.

Cagalli Yula, Gilly's Auto, Krown Rust Proofing

Third year taking Cagalli Yula (2014 Subaru BRZ Limited) to Gilly's Auto in Grantham, NH for her annual Krown treatment. As usual had a nice conversation with Josh and Heather while the car was being sprayed.

Between this and the last visit we have got winter tires and new wheels and summer tires. Josh lets me take a look underneath and thoroughly examine the under side.

Cagalli Yula - Wheels Installed

We got the wheels, tires, TPMS sensors, center caps, and new lug nuts installed on 04/26/2020 and have been driving on them since. Post about order here and delivery of wheels and parts here.

List of parts:
Wheels: Gram Lights (RAYS Wheels) 57DR 17"x9" 5x100 with 38mm offset
Lug Nuts: McGard SplineDrive Tuner 5 Lug Install Kit w/ Locks & Tool (Cone) M12x1.25
Hub Centric Rings: Project KICS 2 Piece Hub Centric Ring Set 65mm Bore with 56.1mm Thickness
TPMS Sensors: DENSO Tire Pressure Monitoring System Sensor
Tires: Michelin Pilot Sport 4S 245/40ZR17